For each of your Lippert 3500lb axles you will need the following components.
Timken Inner Bearing & Race # TMK73VR Qty 2
Timken Outer Bearing & Race # TMK23VR Qty 2
etrailer Grease Seal # 58846 Qty 2
Grease Caps # RG04-040 Qty 1
We do not carry a Timken grease seal or caps in the size you need for your Lippert axle. view full answer...
Yes, the Dexter axle part number 4003321 you referenced works with the hub and drum assembly part # 8-201-5UC3-EZ which is a 5,200 pound axle. The hub pattern is 6 on 5-1/2.
The parts you will need are inner bearing # 25580 (4) and outer bearing # LM67048 (4). You will need seals # RG06-090 and dust cap # RG04-080. The seal and dust cap will come as a pair.
I have included a FAQ and multiple videos for you too. view full answer...
For your wheel bearing, races, and seals, I don't have the dimensions available. For a precise fit, I'll need you to give me the inner diameter and the outer diameter measurements of your bearing.
Most 4 lug hubs use the same bearings so it is a good possibility that the TruRyde Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal # DL21792 may fit. I've attached a video of this kit for you. view full answer...
We have several trailer hub options with the 5 on 4-1/2 bolt pattern and bearings L68149 and L44649. For an idler hub there are 2 options. We have a standard hub, # 84545BX, which includes the bearings, races, seal, grease cap, and lug nuts.
There is also an EZ lube version of the same hub if you have an EZ lube axle. It is # 84545UC1-EZ. It also includes the bearings, races, seal, grease cap, and lug nuts. view full answer...
We do offer the # LM11949 bearings you said is used on your trailer for the inner and outer bearings.
We also offer the race that is used for that bearing. It is part # LM11910.
For the seal you will need to measure the inside diameter of the hub and also the diameter of the spindle the seal rides on since the # LM11949 bearing is not a common combination for both the inner and outer bearing.
You can use a digital caliper like part # PTW80157 to get an accurate measurement. view full answer...
The Dexter 8-248 is a 3500 lb idler hub which uses the L44649 outer/L68149 inner bearing and a 10-19 grease seal. The bearings cross reference to the A4 and A17 bearings you mentioned and the 10-19 seal cross references to the 171255 seal. For bearings/races/seals, you'd need the # BK2-100 kit.
For a replacement galvanized hub (which is what you'd want to use on a boat trailer), use # AKIHUB-545-35-G-EZ-K. The races are pre-installed, which is a good thing because installing the races... view full answer...
We offer all the components you will need to replace your wheel bearings on your 1999 Coleman Sea Pine, but it is not available as a kit.
Wheel Bearing # L44649 quantity 4
Wheel Race # L44610 quantity 4
Grease Seal # 13194 quantity 2
Cotter Pin # 165649 quantity 2
Grease Cap # F001518 quantity 2
The Bearing Buddy Bearing Protectors # BB1980A-SS are a great alternative to the grease caps as they will allow you to add grease to your hub without removing the wheel hub. view full answer...
We do have all the parts you will need but at this time we do not have a kit that contains all the correct bearings for your 2020 Grand Design Reflection 150 Series 260RD 5th wheel. I will list the quantity needed for your 4 hubs as some contain multiple parts.
Inner Bearing # L68149 QTY: 4
Inner Race # L68111 QTY: 4
Outer Bearing # LM67048 QTY: 4
Outer Race # LM67010 QTY: 4
Grease Seals # RG06-050 QTY: 2
Grease Cap # TRDC-233 QTY: 4 if they need replaced.
Bearing Buddys # BB2328SS QTY:... view full answer...
Your Dexter axle SN 125272197 came with the Dexter Electric Brake Kit # 23-450-451. It uses the following bearings and seals.
Inner Bearing # 387A
Outer Bearing # 25580
Inner Race # 382A
Outer Race # 25520
Oil Seal # 10-51
Oil Cap # RG04-300 view full answer...
The closest bearing and seal that we have to what you measured is found in the bearing kit # BK1-100 which is for a BT8 spindle. It comes with 2 bearings, 2 races, 1 grease seal, and a cotter pin.
The bearing part # L44643 is for both the inner and outer bearing. It has an inner diameter of 1.000" while the included race, part # L44610, has an outer diameter of 1.98" which sounds like what you have.
For the seal in the kit we have part # 34823 which has an inner diameter of 1.249" and... view full answer...
We can help you with replacement seals and bearings for your boat trailer and also with replacement hubs if yours are worn or damaged. In general double-lip seals are desirable on boat trailers to help prevent entry of water and the escape of grease.
For replacement bearings use parts # L68149 and # L44649 and for a double-lip seal (as supplied by the manufacturer) use part # BB60002.
If the races in your hubs are worn or damaged you can replace them too, using parts # L68111 and # L44610.
If... view full answer...
The correct Bearing Kit for your Dexter 3,500 lb torsion axles is for the # 84 spindle. This can be found on our site as part # BK2-100. It comes with the Outer Bearing # L44649, Inner Bearing # L68149, and Grease Seal # 58846, as well as the appropriate races.
For replacement EZ Lube Grease Caps you will need part # 21-41-1, and if you need the replacement plugs they will be part # RG04-010. view full answer...
Since you know your 2001 Coleman Cheyenne Camper's bearing, race and seal part numbers it will be easy for you to find replacements.
We offer both individual components and bearing kits too. We do happen to offer a complete kit with your correct bearings, races, grease seal, cotter pin and tang washer, part # BK2-100. You'll need to order one kit per hub.
Individual bearings, races etc. can be found by entering each part number into our search box.
You may care to consider a bearing... view full answer...
We have many hubs and hub and drum assemblies that will fit spindle # TRU47FR and that have a 6 on 5-1/2 bolt pattern. If you just want an idler hub then I recommend etrailer hub # AKIHUB-655-35-K. this hub comes with the races, bearings, seal, dust cap, and lug nuts.
For a hub and drum assembly I recommend # AKHD-655-35-K. The races, bearings, seal, cap, and nuts are included with this assembly as well.
The etrailer parts are a fantastic value with high quality and good price compared... view full answer...
We have 3 different bearing kits that fit your bearing inner diameters you have. If you can find the weight rating on your axle(generally on trailer information tag) that will help you identify the correct kit. All 3 kits use the same Inner Bearing # 25580 but have different outer bearings for the weight capacity. If you do not have information on your axle you will need to pull the grease cap and check your outer bearing for any part numbers that will identify it. Otherwise you can go... view full answer...
The # AKIHUB-545-2-G-1K idler hub for 2000 lb axles includes the L44643 bearings, L44610 races, 34823 grease seal as well as the grease cap and lug nuts.
If you already have the hub, and just need the bearing kit, use # BK1-100 which includes 2 L44643 bearings, 2 L44610 races, a 34823 grease seal and a replacement cotter pin. view full answer...
That certainly does appear to be an oil bath hub. The seal number is associated with 1956 to 1959 Studebakers as far as I could find. It looks like the dimensions of the seal are 1.875 inches inner diameter and 3 inches outer diameter. We have one seal that has the dimensions, # 29031, but it is a grease seal, not an oil seal.
The bearing # 1779 is associated with race # 1729. They fit hub 22834 which from what I could find is not an oil bath hub. The inner bearing that is associated with... view full answer...
The most sure method of identifying replacement bearings and seals is to find the original items' part numbers. The appearance of these reference numbers is shown in the linked photo, along with the points on the spindle to measure (as you did) to find the dimensions that will be needed if the part numbers cannot be confirmed.
If you can find the part numbers you can search for those directly using our search box. If you cannot and need to find bearings by measurement you can use the linked... view full answer...
From what I was able to find out from my research, the Tie Down Engineering 11033 hub has a 5 on 4-1/2" bolt pattern and is designed for 3500-lb axles. Replacement hubs that have these specs typically use a # L68149 inner bearing and # L44649 outer bearing, as well as inner race # L68111 , outer race # L44610 and grease seals with inner diameter of 1.719" and outer diameter of 2.565".
You'll want to verify that your current hubs have these bearings, races and seals to ensure that a replacement... view full answer...
In order to find the correct grease seal and cap you will need to take some measurements since you cannot see a part number. I recommend using a digital caliper like the # PTW80157 to get accurate measurements.
For the grease seal, you will need to measure the grease seal seat which will give you the inner diameter of the correct grease seal. For the cap, you will need to measure the center of the hub where the grease cap/dust cover fits.
Also, the # L68111 is actually the replacement... view full answer...
Go To Results